[NUC] NUC Shows a Black Screen After a Bioses Update

ASUS Support FAQ

FAQ

Resolution

How to potentially fix a failed Bioses update on an NUC Product:

Download the latest Bioses recovery file for your NUC on Download Center.
See the Technical Product Specifications for NUC Products for details about where the security jumper is located.
Follow the steps for Bioses Recovery by Security Jumper:
- Bioses Update and Recovery Instructions for NUCs with the Aptio® V UEFI Firmware Core
- Bioses Update and Recovery Instructions for NUC with Visual Bioses
After any Bioses update, Asus recommends the following steps
1. Press F2 during start up to enter Bioses Setup.
2. Press F9 to set Bioses default values.
3. Customize any Bioses settings, if desired (optional).
4. Press F10 to save and exit Bioses Setup.

Yes No

Contact Support

Please contact with us if the above information cannot resolve your problem

Above information might be partly or entirely quoted from exterior websites or sources. please refer to the information based on the source that we noted. Please directly contact or inquire the sources if there is any further question and note that ASUS is neither relevant nor responsible for its content/service
This information may not suitable for all the products from the same category/series. Some of the screen shots and operations could be different from the software versions.
ASUS provides the above information for reference only. If you have any questions about the content, please contact the above product vendor directly. Please note that ASUS is not responsible for the content or service provided by the above product vendor.
Brand and product names mentioned are trademarks of their respective companies.

ASUS Support FAQ