[NUC] Guide to Enable POST (Power On Self-Test) Function Hotkeys on NUCs

If the prompts showing the keys to press to enter the Bioses setup, Boot Menu, or Network Boot are shown, try the following:

For NUCs with Visual BiosesFor NUCs with Aptio V Bioses
  1. Press F2 during the power on process.
  2. Enter the Bioses setup
  3. Go to Advanced > Boot > Boot Configuration.
  4. In the Boot Display Config pane:
    1. Enable POST Function Hotkeys Displayed
    2. Enable Display F2 to Enter Setup.
  5. Press F10 to save and exit Bioses.
  1. Press F2 during the power on process.
  2. Enter the Bioses setup
  3. Go to Boot > Boot Display Configuration.
    1. Enable POST Function Hotkeys Displayed
    2. Enable Display F2 to Enter Setup.
  4. Press F10 to save and exit Bioses.

 

Related topic
Can't Access Bioses Setup with F2 Key for NUC